<code id="qsoku"></code>
  • <strike id="qsoku"><sup id="qsoku"></sup></strike>
    <th id="qsoku"><video id="qsoku"><acronym id="qsoku"></acronym></video></th>
  • <center id="qsoku"></center>
    <object id="qsoku"></object>
  • <strike id="qsoku"><video id="qsoku"></video></strike>
    <th id="qsoku"><video id="qsoku"></video></th>

  • 歡迎光臨 昆山智高鑫精密機械有限公司 官網!
    昆山智高鑫精密機械有限公司愿景:成為領先的工業自動化裝備系統制造商
    全國咨詢熱線:15850328058
    聯系我們
    15850328058

    手機:15850328058

    郵箱:zgx8058@163.com

    QQ:223920590

    地址:江蘇省昆山市千燈鎮圣祥中路328號

    圓刀模切機

    豐富的選配: ● 輥筒加熱功能 ● CCD 視覺調整功能 ● 超聲波封邊功能 ● 噴墨打碼功能 ● 加裝吸廢機 ● 模切進料寬度可選:350mm/450mm/550mm/650mm

    產品詳情




    圓刀-刀皮模切


    豐富的選配:

    ● 輥筒加熱功能
    ● CCD 視覺調整功能
    ● 超聲波封邊功能
    ● 噴墨打碼功能
    ● 加裝吸廢機
    ● 模切進料寬度可選:350mm/450mm/550mm/650mm
    Rotary Die-cutting Machine Series
    Multiplex Optional:
    ● Heating function of roller
    ● Visual adjustment of CCD
    ● Ultrasonic edge sealing
    ● Delta ink jet printing
    ● Addition of waste suction machine
    ● Die cutting feed width: 350mm/450mm/550mm/650mm

    功能特點:
    ● 機架采用框架結構,強度高,套切穩定。
    ● 每套模切工位均有單獨的伺服系統驅動,實現各工位啟、停、正轉、反轉、同步、比例、微調等功能。
    ● 具有糾偏功能:能實現入料方向自動調整。
    ● 獨立式調刀裝置,更便于刀軸的位置調整。
    ● 計片報警停機功能,能夠按設定數量自動停止設備。
    ● 各收、放料軸可分別選擇自動恒張力控制或手動張力控制模式。
    ● 斷料報警停機功能,料軸材料用完或斷料后設備自動停機,防止料頭卷入設備。
    ● 各收放料軸均配有一鍵式啟動和停止按鈕,更便于操作人員換料作業。
    ● 具有異步功能:實現小片貼大片,多片分組裁斷,有效節約成本。
    ● 一機兩用功能:獨立操作可對兩組模切軸進行任意配置。(十工位以上機型)
    ● 具有安全保護功能:拉線緊急開關。
    Features:
    ● The Rack adopts design of frame structure, with high strength and stable register cutting.
    ● Each set of die-cutting station is driven by separately servo system, to reach the functions of start, stop, forward
    rotation, reverse rotation, synchronization, proportion and fine adjustment.
    ● It has the function of web guiding,it can realize the automatic adjustment of feeding direction.
    ● Independent tool adjusting device is more convenient for adjusting the position of cutter shaft.
    ● Sheet counting alarm and shutdown function can automatically stop equipment by the setting number .
    ● Automatic constant tension control or manual tension control mode can be selected for each rewinding and unwinding shaft.
    ● Fracturing material alarm and shutdown function, the equipment will stop automatically after the material on the material
    shaft is used up or fractured, prevent the material cap from being drawn into the machine.
    ● Each rewinding and unwinding shaft is equipped with one key start and stop buttons, which is more convenient for
    operators to change materials.
    ● It has asynchronous function, to realize small sheet attached on large sheet, and group cutting for multiple sheets, which
    can effectively save cost.
    ● One machine dual-purpose function: independent operation of two groups of die-cutting shaft, which be configured as
    you please. (only supported by model with 10 stations +)
    ● With safety protection function: emergency switch for cut off system power immediately.

    性能參數 Technical Data:

    型號 Model
    二十工位 Twenty-Station
    十六工位 Sixty-Station
    十二工位 Twelve-Station
    十工位 Ten-Station
    八工位 Eight-Station
    七工位 Seven-Station
    五工位 Five-Station
    三工位 Three-Station
    模切工位(組)Die-cutting station (group)
    20
    16
    12
    10
    8
    7
    5
    3
    收放料軸(套)Rewinding&unwinding shaft (set)
    40
    32
    24
    20
    16
    14
    10
    6
    最高轉速 Maximum speed(M/MIN)
    60
    60
    60
    60
    60
    60
    60
    60
    收放卷軸直徑(英寸)Rewinding&unwinding shaft diameter (inch)
    3
    3
    3
    3
    3
    3
    3
    3
    最大材料寬度 Maximum size of the material(mm)
    250
    250
    250
    250
    250
    250
    250
    250
    最大材料直徑 Maximum diameter of the material (mm)
    450-600
    450-600
    450-600
    450-600
    450-600
    450-600
    450-600
    450-600
    齒數范圍 Cutter range
    50-200 齒
    50-200 齒
    50-200 齒
    50-200 齒
    50-200 齒
    50-200 齒
    50-200 齒
    50-200 齒
    圓刀齒數節距 Cutter pitch
    1/8”
    1/8”
    1/8”
    1/8”
    1/8”
    1/8”
    1/8”
    1/8”
    電源規格 Rating Voltage(V)
    三相 380+N
    最大功率 Maximum Power(KW)
    51
    40
    31
    18
    20
    18
    13
    8
    氣源規格 Air Requirement
    0.6Mpa , 0.05 m³/min
    糾偏 web guiding
    主體框架 Main frame
    焊接框架
    焊接框架
    焊接框架
    焊接框架
    焊接框架
    焊接框架
    焊接框架
    鋁型材
    尺寸 Size (mm)
    7590*1450*2380
    6350*1450*2380
    5110*1450*2380
    4490*1450*2380
    4150*1450*2380
    3560*1450*2380
    2940*1450*2380
    1900*1350*1980
    重量 Weight (T)
    10
    7.8
    6.5
    5.6
    4.4
    4.2
    3.8
    1.8

    標簽:
    • 上一篇:沒有了
    • 下一篇:沒有了

    聯系方式

    昆山智高鑫精密機械有限公司

    手機:15850328058

    電話:0512-36808936

    傳真:0512-36808933

    電郵:zgx8058@163.com

    地址:江蘇省昆山市千燈鎮圣祥中路328號

    采購:圓刀模切機
    看不清?點擊更換看不清?

    相關產品/ RELATED PRODUCTS
    在線客服
    聯系方式

    熱線電話

    15850328058

    上班時間

    周一到周六

    公司電話

    15850328058

    二維碼
    手机永久无码国产av毛片_又爽又色又过瘾的视频_日本公与熄乱理在线播放_在线亚洲专区中文字幕